KNIGHT D-SERIES SERVO HOIST OPERATION MANUAL
SECTION 7
TROUBLESHOOTING
128
7.16) Alarms / Warnings screen
This screen shows all drive alarms or faults as well as any warnings that may be active on the hoist.
In section (
I
), if the ‘DRIVE ALARM’ indicator box is red then an alarm is active and an alarm code will
be listed. If the indicator box is green then there are no active drive alarms.
In section (
II),
if the ‘DRIVE WARNING’ indicator box is yellow then that alarm is active and an alarm code
will be listed. If the indicator box is green then there are no active warnings.
In section (
III
), if the indicator box is yellow then that particular user warning is on, but if the indicator box is
gray then that particular warning is off.
This screen gives an overview of active drive alarms and warnings. (Refer to Figure 7-16)
Also, refer to section 5.F. ‘Accessing the Servo Hoist’s Fault Log’ for instructions on how to access the
system’s fault log through the servo’s web page.
Figure 7-16
I
II
III
