• An earth connection must be made to the earth terminal of the socket. Use green/yellow
sleeving on earth conductors that are not insulated. The earth terminal in the backbox is
provided for convenience and does not need to be connected
• Check all electrical connections are secure with no loose strands of cable
• Ensuring the gasket does not become damaged or pinched, fit the socket assembly onto the
backbox, taking care not to compress, damage or trap any cables, and secure with the
screws provided - do not overtighten
• Fit screw covers
• Switch on and check for correct operation
• For security, and to prevent unwanted tampering with the product, a lug feature with a
6mm hole is provided to accept a padlock or similar locking security device (not included)
To pair a remote control:
• Press the left switch on the socket until the indicator starts flashing, then release
• Press the “A” button on the remote. This will enact the pairing procedure for both sockets
To unpair an existing remote:
• Press and keep the left switch pressed, the indicator will flash and then it will turn off
completely
Changing the battery:
• Using a small flat-head screwdriver, remove the cover from the remote and take out the PCB
• Remove the old batteries and insert two new CR2016 batteries (see Fig. 4)
REMOTE CONTROL
