SAFETY AND INSTALLATION INSTRUCTIONS
120106-SM
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: sales@eterna-lighting.co.uk
Visit our website:
www.eterna-lighting.co.uk
LAMP REPLACEMENT:
1. Unplug or switch off the electricity at the mains.
2. Release the front cover screws.
3. Remove and replace lamp. Use a soft cloth; do not touch with bare fingers.
4. Refit front cover, ensure gasket is in position and tighten screws.
REPLACEMENT LAMP TYPE:
Wattage:
1300W
Supply Voltage:
240V
Size:
255mm
Type:
R7 IR Ruby Halogen
EVENTUALLY, YOU MAY WANT TO REPLACE THIS LIGHT FITTING:
When your product comes to the end of its life or you choose to update or upgrade it by replacing
it, please do not dispose of it with your normal household waste and please recycle where facilities
exist. When you need to dispose of this fitting you can check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment (European “WEEE Directive” effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ.
Model:
PAT1300W
1300W WALL MOUNTED PATIO HEATER
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
Pack contents:
1 x heater c/w 5m mains
lead with 3-pin plug
1 x mounting bracket
1 x bolt
1 x locknut
IP54
1m
