• All earth connections must be made and maintained. Use green/yellow sleeving on earth
conductors that are not insulated
• Check all electrical connections are secure with all exposed copper within the terminal and
no loose strands of cable.
• Fit the unit into a suitable wall box taking care not to compress, damage or trap any
cables, and secure with the screws provided.
• Clip the front plate onto the main assembly ensuring the screwdriver notch is at the side
• Switch on and check for correct operation
• Press the power button directly under the speaker. The Bluetooth indicator will begin to
flash
• Activate Bluetooth pairing on your mobile device and scan for Bluetooth devices
• Connect to the device named SPEAKER, SPEAKER01, SPEAKER02 etc
• Once a connection has been established you will hear a “beep” sound and the Bluetooth
indicator will flash at a different frequency to confirm
Bluetooth audio specification:
• Output power: max. 3W RMS
• Sensitivity: L/R 380MV
• SNR: >80dB
• Speaker frequency range: 280Hz – 16KHz
BLUETOOTH CONNECTION
