• Installation of this product should only be carried out by a qualified electrician or competent person
to the latest Building and current IEE Wiring Regulations (BS7671)
• Please isolate mains prior to installation/maintenance
• Check the total load on the circuit (including when this product is fitted) does not exceed the rating
of the circuit cable, fuse or circuit breaker
• This product is Class I and requires an earth
• This product is IP54 rated (only when the product is in the closed position with no appliances
attached)
• Provide power to the required point of installation
• Locate a suitable place to mount the product. We recommend a surface thickness of min 10mm to
max 50mm
• Cut a 90mm hole in the surface, allowing a 25mm clearance around the hole (see Fig 1)
• Note: ensure there is sufficient space beneath the surface when the product is in the closed
position
SAFETY
INSTALLATION
CONTENTS
These instructions should be read carefully and retained after installation by the end user for future
reference and maintenance.
These instructions should be used to aid installation of the following product:
SK006
90mm
25mm
Fig 1
