3/12
» User Manual - Digital Tester K154433N50
14 Use only genuine replacement parts, components and kits as supplied by Knorr-Bremse or the vehicle manufacturer. Only use the recommended tools as specified in related
Knorr-Bremse instructions.
15 The serviced or replaced product must be checked for correct function and effectiveness.
16 If products have been dismantled, serviced or replaced, whose performance could affect braking performance or system behaviour, this should be checked on a roller
dynamometer. Bear in mind that a lower performance may be experienced during the bedding-in phase if new brake pads/linings and/or brake discs/drums have been fitted.
17 The use of impact screwdrivers or impact wrenches in conjunction with Knorr-Bremse service tools for air disc brakes is not permitted. The service tools are not designed for
such use. It is likely that the tools or the vehicle will be damaged and there is a serious risk of injury – see Caution above.
18 Do not use compressed air to clean the disc brake. Avoid air contamination of brake dust.
19 Prior to returning the vehicle to service, make certain that all components and the complete brake systems are leak free and restored to their proper operating condition.
Welding
To avoid damage to electronic components when carrying out electrical welding, the following precautions should be observed:
1
In all cases, before starting any electrical welding, remove all connections from any electronic control units or modules, noting their position and the order in which they are
removed.
2
When re-inserting the electrical connectors (in reverse order) it is essential that they are fitted to their correct assigned position - if necessary this must be checked by PC
Diagnostics.
Disposal of Waste Equipment by Business Users in the European Union
This symbol on the product, packaging or in user instructions, indicates that this product must not be disposed of with other general waste. Instead,
it is your responsibility to dispose of the waste electrical and electronic parts of this product by handing them over to a company or organisation
authorised for the recycling of waste electrical and electronic equipment. For more information about arrangements for waste equipment disposal please contact
your Knorr-Bremse distributor or local Knorr-Bremse representative.
Revision Details
Rev. 001
July 2020
New Layout, values correction on page 10
