4/12
KNORR-BREMSE
XXXXXX XXXXXXX
XXXXXXXXXXXXXX
X XXXXX XXXXX
KNORR-BREMSE
XXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXX XXXXXXX
X XXXXX XXXXX
A
A
A
A
A
A
B
B
B
C
C
C
D
D
D
» Y119119 – (EN - REV. 001) | JULY 2020
WARNING ADVICE / BRAKE IDENTIFICATION
Warning advice
The potentiometer tester K154433N50 is an electronic measuring device, which must be protected against excessive humidity and heat. The tester must only be connected to brakes
which are supplied with a Knorr-Bremse ‘continuous’ or a ‘black/white’ sensor (potentiometer). The tester supplies voltage to the brakes being measured and therefore it must only
be connected where there is no voltage, either external or from the vehicle. Usage contrary to this specification may damage the device. When fitting the battery ensure the correct
polarity (plus and minus). Warranty claims will not be honoured if the device has been opened (except the battery compartment).
Please also refer to the service manuals for Knorr-Bremse air disc brakes and specifications of the vehicle manufacturers. You will find Knorr-Bremse service manuals
on our website www.knorr-bremseCVS.com
Brake Identification and Service Manuals
SB5.../SB6.../SB7.../SN5.../SN6.../SN7.../SK7.../SL7.../SM7.../ST7...
Brake
Service Manual
SB5...
No service manual available, refer to manual for SB6/SB7.
SB6..., SB7...
C16352-#
SN5...
Y015044-#
SN6..., SN7..., SK7...
Y006471-#
SL7..., SM7...
Y081564-#
ST7...
Y173241-#
#- Refer to website for latest revision
www.knorr-bremseCVS.com
A
= Axle or vehicle manufacturer’s identification number
B
= Knorr-Bremse brake type number
C
= Knorr-Bremse part number
D
= Knorr-Bremse date of manufacture
