2
Knorr-Bremse Group
PD-203-430
ES1305
Doc. No. Y250906 (EN - Rev. 000)
July 2016
The information contained herein is subject to alteration without notice and therefore may not be the latest release. Please check our website www.knorr-bremseCVS.com for the latest update or contact your local Knorr-Bremse representative.
The figurative mark “K” and the trademarks KNORR and KNORR-BREMSE are registered in the name of Knorr-Bremse AG. Additional terms and conditions apply; please refer to our website knorr-bremseCVS.com for full Disclaimer.
Note: If service work is carried out on a vehicle based on information provided herein, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full
functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.
Copyright © Knorr-Bremse AG - all rights reserved, including industrial property rights applications. Knorr-Bremse AG retains any power of disposal, such as for copying and transferring.
Knorr-Bremse Systeme für Nutzfahrzeuge GmbH . Moosacher Straße 80 . 80809 Munich . Germany . Tel: +49 89 3547-0 . Fax: +49 89 3547-2767 . www.knorr-bremse.com . www.knorr-bremseCVS.com
KB4TA ABS Module
P r o d u c t D a t a
Technical Features
Max. operating pressure:
12.5 bar
Operating temperature range:
-40 °C to +65 °C
Weight:
5.7 kg approx.
Degree of Protection:
DIN 40050 part 9 IP69K
Nominal voltage:
24 V DC
Range Overview
Part No.
Type No.
As supplied
Configuration
Stop Lamp Power
AUXIO 1
K004236
ES1305
2S/2M
Enabled
Return to ride height
#
K004246*
ES1305
2S/2M
Enabled
Headboard warning lamp
ES1305
Configuration
2S/2M - 4S/2M
4S/3M *
With stop lamp powering
1 output
or
1 input
-
Without stop lamp powering
2 outputs
or
1 ouput + 1 input
1 output
or
1 input
Depending on the module and configuration, up to two outputs are available:
Outputs
K004236
K004246
Off
√
√
24 V
√
√
Trailer headboard warning lamp
√
√
RtR
√
ISS
√
ABS active
√
Inputs
K004236
K004246
Brake pad wear sensing
√
√
Parameterisation possible:
* Will be replaced by K004236.
#
Configurable in
ECU
talk
®
* Auto-configuration not possible.
Y026787: 006: EN: Released: Fri Nov 11 11:18:50 CET 2016:
