2
Knorr-Bremse Group
PD-203-530
ES1220
Doc. No. Y250907 (EN - Rev. 001)
September 2016
The information contained herein is subject to alteration without notice and therefore may not be the latest release. Please check our website www.knorr-bremseCVS.com for the latest update or contact your local Knorr-Bremse representative.
The figurative mark “K” and the trademarks KNORR and KNORR-BREMSE are registered in the name of Knorr-Bremse AG. Additional terms and conditions apply; please refer to our website knorr-bremseCVS.com for full Disclaimer.
Note: If service work is carried out on a vehicle based on information provided herein, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full
functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.
Copyright © Knorr-Bremse AG - all rights reserved, including industrial property rights applications. Knorr-Bremse AG retains any power of disposal, such as for copying and transferring.
Knorr-Bremse Systeme für Nutzfahrzeuge GmbH . Moosacher Straße 80 . 80809 Munich . Germany . Tel: +49 89 3547-0 . Fax: +49 89 3547-2767 . www.knorr-bremse.com . www.knorr-bremseCVS.com
KB4TA D ABS ECU
P r o d u c t D a t a
Technical Features
Operating temperature range:
-40 °C to +65 °C
Weight:
1.2 kg approx.
Degree of Protection:
DIN 40050 part 9 IP69K
Nominal voltage:
24 V DC
Voltage range:
19 to 32 V
Part No.
Type No.
As supplied
Configuration Stop Lamp Power
AUXIO 1
Comments
K068353
ES1220
2S/2M
Enabled
Configurable in
ECU
talk
®
2)
K140786
1)
ES1220
2S/2M
For Brazil - use with
junction box on
4S/3M systems
3)
K146282
1)
ES1220
2S/2M
For Brazil - use with
standard wiring on
4S/3M systems
3)
ES1220
Configuration
2S/2M - 4S/2M
4S/3M *
With or without stop lamp powering
1 output
or
1 input
1 output
or
1 input
Outputs
Off
√
24 V
√
Trailer headboard warning lamp
√
RtR
√
ISS
√
ABS active
√
Inputs
Brake pad wear sensing
√
Parameterisation possible:
* Auto-configuration not possible.
1)
Part No. may carry a suffix.
2)
Use only with external ABS Modulator Relay Valve K019290.
3)
Use only with external ABS Modulator Relay Valve K019299. Sales/usage is restricted to Brazil only.
Y026787: 006: EN: Released: Fri Nov 11 11:18:50 CET 2016:
