1
Knorr-Bremse Group
PD-203-400
The information contained herein is subject to alteration without notice and therefore may not be the latest release. Please check our website www.knorr-bremseCVS.com for the latest update or contact your local Knorr-Bremse representative.
The figurative mark “K” and the trademarks KNORR and KNORR-BREMSE are registered in the name of Knorr-Bremse AG. Additional terms and conditions apply; please refer to our website knorr-bremseCVS.com for full Disclaimer.
Note: If service work is carried out on a vehicle based on information provided herein, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full
functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.
Copyright © Knorr-Bremse AG - all rights reserved, including industrial property rights applications. Knorr-Bremse AG retains any power of disposal, such as for copying and transferring.
Knorr-Bremse Systeme für Nutzfahrzeuge GmbH . Moosacher Straße 80 . 80809 Munich . Germany . Tel: +49 89 3547-0 . Fax: +49 89 3547-2767 . www.knorr-bremse.com . www.knorr-bremseCVS.com
DATA
P r o d u c t
C o m m e r c i a l V e h i c l e S y s t e m s
KB4TA System Overview
Doc. No. Y250904 (EN - Rev. 000)
July 2016
The Knorr-Bremse
KB4TA module ES1305
(see
PD-203-430, Document No.
Y250908
) is an integrated
ABS electronic control unit and dual modulator valve for
air braked trailers with mechanical or air suspension.
KB4TA
is designed to work in trailer systems powered
via ISO 7638 but the addition of ISO 1185 stop lamp
powering is included as standard as a safety feature so,
in the event that there is no ISO 7638 powering, the ABS
function is maintained.
Note: Stop lamp powering should only be considered
as a backup in the event of failure of the ISO 7638
connection.
The
KB4TA
module is designed for all normal system
variants from 2S/2M up to 4S/3M. The configuration
as supplied is 2S/2M, but with the integrated
auto-configuration the module detects additional sensors and adjusts upward to 4S/2M automatically.
Other configurations and additional functions can be quickly and effectively achieved using PC Software
ECU
talk
®
. For 4S/3M applications an additional external (third) ABS modulator is necessary (see
PD 203-360, Document No.
Y250908
).
The
KB4TA
brake system is capable of working with drum brake or disc brakes and the systems shown below are
only typical. For more systems see PD-203-480, Document No.
Y250911
.
Function
KB4TA System diagram (2S/2M) for semi-trailer with air suspension and disc brakes
Legend:
1 Coupling Head with Filter -
“Supply”
2 Coupling Head with Filter -
“Control”
3 ABS Connector ISO 7638
4 Park / Shunt Valve with
Emergency Function and integral
Charging Valve
5 Air Reservoir
6 Drain Valve
7 Load Sensing Valve
8 ABS Module with 6 delivery
ports
9 Brake Chamber
10 Spring Brake
11 Sensing Ring and Wheel Speed
Sensor
12 Air Spring Bellow
13 Levelling Valve
14 Test Connector
15 Electrical Connector “Lighting”
acc. to ISO 1185
sys_dia_001
1
2
3
7
15
5
6
4
8
14
9
11
12
10
13
Y026787: 006: EN: Released: Fri Nov 11 11:18:50 CET 2016:
