TEMON 4-C
Doc. N°
MO-0368-ING
Microener. - Copyright 2010
2.1
Date
01.12.2008
Rev.
0
Pag.
14
of
14
17. Technical Features
auxiliary power supply
20÷250Vca/cc ±15% or 115-230-400 Vca 50-60Hz
maximum consumption
4 VA
measure inputs
3 - 4 inputs by RTD Pt100
interval of measure
0 °C ÷ +220 °C / precision ± 2 °C
tripped delay - hysteresis
5 seconds
– 2 °C
measure visualization
2 displays with led 7 segments, 3 digit
outputs
4 relay NO-C-NC, 8 A resistive load
output functions
alarm, trip, fan, auto-diagnostic
functions programmable
ALARM, TRIP, HOLD, FAN, T.MAX, HOT
connection
extractible terminal with screws, section wires max 2,5 mm
2
insulation
2500 Vrms 50 hz per 60 sec :U aux - input Pt100 /
U aux - relay outputs / inputs Pt100 - relay outputs
protection degree
IP52 front panel (IP65 with optional protection cover), IP20 rear panel, as CEI-EN 60529
dimensions
– enclosure
flash mounting DIN 96x96mm, depth 120mm /
Enclosure thermoplastic self-extinguishing as UL94 V0
working temperature
-10 ÷ 55°C, humidity max 90%
storing temperature
-25 ÷ +80°C
standards
electromagnetic compatibility CEI-EN 50081-2 CEI-EN50082-2
security CEI 41.1, CEI-EN 60255-
18. Dimensions
Contact t
he technical assistance or refer at specific document for application don’t described in this manual.
NOTE
At reason of the evolution of standards and products, the company reserves to modify in every time the features of the product
described in this d
ocument, that it’s necessary to verify preventively.
The liability of the producer for damage caused by defect of the product ”can be reduced or deleted (…) when the damage is
caused joint by a defect of product or for blame of the damaged or a person of w
hich the damaged is responsible” (Article 8,
85/374/CEE).
Quartier du Pavé Neuf,49 rue de l’Université – 93160 Noisy le Grand - France
Tél : +33 1 48 15 09 09
– Fax : +33 1 43 05 08 24 email :
- http://
Les cotes, schémas et spécifications n’engagent Microener qu’après confirmation
