6
1
» Y276710 – (EN - REV. 001) | May 2020
1 GENERAL INFORMATION
1.1
Technical changes
1.2
Target group for this document
DANGER
Please read this entire document carefully to ensure safety of operation and to avoid personal
injuries and damage to equipment.
NOTE
This document will be useful to other target groups as well, e. g. project engineers.
However, it does not claim to provide complete information for such target groups.
KNORR-BREMSE reserves the right to change the unit or this document at any time without giving special notice.
This document is intended for use by trained service technicians who:
-
have the skill, experience, safety awareness and professional ability
- to remove and install the unit,
- to inspect, service and debug the unit,
-
have read and understood this document from start to finish and are familiar with the safety codes and
accident prevention regulations for these activities.
