OWNER’S MANUAL & SAFETY INSTRUCTIONS
Save this manual
keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s se-
rial number in the back of the manual (or month and year of purchase if product has no
number).
Keep this manual and the receipt in a safe and dry place for future reference.
WARNING
Read this material before using this product. Failurs to do so can result in serious
injury.
Save this manual.
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
Addresses practices not related to personal injury.
DANGER
WARNING
CAUTION
NOTICE
CAUTION
IMPORTANT SAFETY INFORMATION
WARNING
InformationFailure to
heed these warnings
may result in personal injury and/or
property damage:
1. Study, understand, and follow all
instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Center load on saddle.
5. Use as matched pair to support one
end of a vehicle only.
6. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
7. Do not use for aircraft purposes.
8. Support vehicle only at
manufacturer-recommended locations.
9. Inspect before every use; do not use
if parts loose or damaged. Do not use
if even a minor crack, bend or other
damage/deformation appears. Discard
Jack Stand if damaged or deformed.
10. To prevent serious injury, bend in tab
after inserting post.
11. This product is not a toy. Do not allow
children to play with or near this item.
12. Use as intended only.
13. Inspect before every use; do not use if
parts are loose or damaged.
14. Be aware of dynamic loading! Sudden
load movement may briefly create
excess load causing product failure.
15. Keep work area clean and well lighted.
16. Do not use stand when you are tired or
under the influence of alcohol or drugs.
17. Only use on a dry, level, flat surface,
free of grease or debris. The surface
must be capable of supporting the
combined weight of vehicle and Stands.
18. Maintain product labels and nameplates.
These carry important safety
information.
