Safety guidelines - definitions ............................................. 1
Product specifications KN DP-2000N ................................. 1
General power tool safety rules .......................................... 1
Important safety instruction for drill press .......................... 2
Electrical requirements and safety ...................................... 4
Glossary of terms ................................................................ 5
Symbols ............................................................................... 6
Carton contents ................................................................... 6
Functional description ......................................................... 7
Tools needed for assembly ................................................ 8
Assembly and adjustments ................................................ 8
Operating instructions ....................................................... 12
Maintenance ...................................................................... 14
Troubleshooting ................................................................. 15
Parts list ............................................................................ 16
Exploded view .................................................................... 17
Notes ................................................................................. 36
PRODUCT SPECIFICATIONS KN DP-2000N
GENERAL POWER TOOL SAFETY RULES
TABLE OF CONTENTS
1
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY
and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE:
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may
result in property damage.
WARNING
• Read all safety warnings and all instructions.
Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
• People with electronic devices, such as
pacemakers, should consult their physician(s)
before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker
could cause interference or failure of the pacemaker.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
• Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the
dust or fumes.
•
Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged
or entangled cords increase the risk of electric shock.
Motor:
1/3 HP, 120 V ~, 60 Hz
Speeds:
5 (750 - 3 200 RPM)
Morse cone:
JT 33
Chuck size:
1/2” (13 mm)
Table tilt:
45º L & 45º R
Spindle travel:
2” (50.8 mm)
Distance from
spindle to column:
4” (101.6 mm)
Column diameter:
1-13/16” (46 mm)
Table size:
6-15/32” x 6-15/32”
Base size:
10-7/8” x 7”
Overall height:
23” (584.2 mm)
Weight:
31.75 / 34.4 lbs
Laser guide:
Yes
Summary of Contents for KN DP-2000N
