DS241x00
- Graphic controls
User manual
www.besknx.com
11
Other configurable point, is the thermostat function mode
, being possible to select between cold
, hot
, mix
or Off
.
As last editable element by user, it is possible to define the temperature set point linked to the scene
which will be the
net set point temperature when the scene executes. To edit this value, just tap over the number and, keeping touch, move
the finger upward or downward to increase or decrease the temperature.
Once all the parameters have been defined, it is possible to check a horizontal color bar at the bottom that indicates which
temperature set point for the next 24 hours (00:00 h being the left end of the bar, and 23:59 h the right) depending on
schedules
. For higher values of temperature set point, color will be nearest to red, while green will represent low set
points. Yellow means intermediate values and gray represents time with the thermostat off.
HISTORICAL DATA
In the right upper corner, this icon gives access to a historical of temperatures measured by the thermostat, presented in a
graphic displayed in a new window. In this new interface, we can check information on a daily, weekly or monthly graphic.
User can define the period just selecting the mode in the bottom of the graph.
3.1.2.5
FLOOD
The working mode for the flood detector is as follows:
Whenever a water leak happens, it is indicated by showing the icon in yellow. In neutral position the icon is off (blue colour)
Stand by (no leakage)
Active position (leakage)
