DS241x00
- Graphic controls
User manual
www.besknx.com
16
If you wish to add scripts to an event, you only need to slide the corresponding icons from the lower rail to the icons box in
the upper right part. If you are interested in deleting a script, you will only need to tap on the icon and then press on the delete
button (right side of the screen)
.
If you add icons, the status of the output connected to the icon will be linked to the event. It means that in case the event is
executed, the devices will adopt the status they had in the moment that the event was edited.
During the events’ edition, the device will only allow to add icons that are represented on the drawings as mentioned in section
3.1 of this manual. It is permitted to edit the icon status you want to get from an included point to point control. You only need
to select the specific icon and use the option
. This means, while you edit a scene, if the specific icon is off, you can
define that the icons status in the scene will be on.
It is just necessary to choose the status you want to get for each icon and the scene will be defined for your selection.
3.3
Lower control rail
You will see the lower rail if you tap and slide upwards the main drawings’ screen. So you will be able to access to all
functionality described in this section.
