3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database.
Planning, installation and commissioning of the device are carried out with the aid of KNX-
certified software. Full functionality with KNX commissioning software version ETS3.0d
onwards.
An updated version of the product database, technical descriptions and conversion programs
and other auxiliary programs are available on our Internet website.
Intended use
-
Switching of AC 230 V electrical loads with floating contacts
-
Switching of electrically-driven Venetian blinds, shutters, awnings and similar hangings
-
Mounting on DIN rail in small distributors
Product characteristics
-
Outputs can be operated manually, construction site mode
-
Feedback in manual mode and in bus mode
-
Scene function
-
Disabling of individual outputs manually or via bus
Characteristics switch operation
-
Operation as NO or NC contacts
-
Logic and restraint function
-
Feedback function
-
Central switching function with collective feedback
-
Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
Characteristics blinds operation
-
Suitable for 230 V AC motors
-
Blind/shutter position directly controllable
-
Slat position directly controllable
-
Feedback of movement status, blind/shutter position and slat position
-
Forced position through higher-level controller
-
Safety function: 3 independent wind alarms, rain alarm, frost alarm
-
Sun protection function
2/11
82560023
J:0082560023
05.08.2013
Switch actuator / blinds actuator
