Connecting the device
Figure 3
o
Connect bus line with connecting terminal.
o
Connect mains voltage supply.
i
Delivery state: Outputs can be operated using button field, construction site mode. All
outputs are set as blind/shutter outputs.
Connecting switched loads
Output is parameterised as a switching output.
CAUTION!
Overloading the device leads to excessive heating.
Damage to the device and the connected cables may result.
Do not exceed the maximum current carrying capacity.
o
Connected switched loads (figure 4).
Figure 4
6/11
82560023
J:0082560023
05.08.2013
Switch actuator / blinds actuator
