manualshive.com logo in svg

KNX Module IC-USB-S.1, User Manual

The KNX Module IC-USB-S.1, a cutting-edge device, offers seamless integration between KNX systems and USB interfaces. Enhance your home automation experience with this versatile module. For detailed information on installation and functionality, download the free user manual at 88.208.23.73:8080. Experience the power of KNX technology firsthand!

Share
Download
background image

The  KNX  USB  interface  provides  data  transfer  between  the  PC  and  the  KNX  bus  via  USB.  Used  to 
configure, monitor, visualize and manage devices on the KNX network.

•     Protocol cEMI (Common EMI)

•     Supports «RAW Frame» operation mode

•     Interface USB 2.0 type B

•     LED status indication

•     Long telegrams with up to 220 bytes APDU length are supported

•     USB and KNX TP galvanic isolation

•     Power supply via USB

•     Low power consumption

•     DIN rail 35mm mounting

IC-USB-S.1

1  BASIC INFORMATION

page 3

module-electronic.ru

Summary of Contents for Module IC-USB-S.1












Reviews:

No comments

Related manuals for Module IC-USB-S.1

Kvaser USBcan Light User Manual preview
USBcan Light
Brand: Kvaser Pages: 18

Brands by name

Popular brands

Load more brands