Warning!
Be certain to use only KO Propo
genuine FM crystal sets(transmitter
and receiver). Never use crystals
produced by other companies since
such crystals may vary in frequency,
which could lead to misoperation or
out of control
Warning!
Be sure to use grommets and be
sure that the servo is not touching
any metal plates directly. * The
vibrations may damage the servo and
the model may run out of control.
Warning!
Be sure to connect all equipment
correctly. If connections are loosened
by vibration,the model may run out of
control.
Caution!
Be sure to use genuine KO Propo
products e.g. transmitter,receiver,
ESC and other optional parts.
* We cannot assume any
responsibility for the use of other
companies products with this unit.
Connecting
the receiver
For an electric-powered car (FET servo + FET
For a gasoline-powered car (6V FET servos)
For a gasoline-powered car (7.2V FET Servos)
Warning!
Do not cut or bundle the aerial wire
with other cords. It may result in
decreasing the sensitivity of the
receiver and may result in the model
running out of control.
Caution!
Be careful not to reverse the polarity
of the transmitter and the receiver.
Reverse polarity could damage the
units.
Crystal
replacement
Antenna Lead
Steering Servo
7.2V FET Servo
Receiver
5N600mAh
6VNicd Battery
6N600mAh
7.2VNicd Battery
Switch Harness
Receiver
Receiver
Throttle Servo
Steering Servo
Throttle
Servo
7V Reguletor
Switch Harness
Steering
Servo
Electric
Speed Controler
BATT
CH1
Switch Harness
Steering Servo
CH2
ESC or Throttle Servo
I'm sorry,
I forgot it.
Please give
me grometts
~~~~~~!!
How did you
get this
scratch?
Connecting the Receiver
79
Optional