10
Double bottle warmer – F6211
How much water
should I add to the
product?
Fill the product with water reaching a half of the milk level in the bottle. It
is advised to add 70-100ml water to the product for sterilization.
Can I use the prod-
uct to keep milk or
baby food warm
overnight?
However, we don't recommend it. With the keep warm function you can
keep milk or baby food warm at the right temperature. It is recommended
to feed your child as soon as possible after the milk or baby food is warmed
up. We advise you not to reheat the milk or baby food.
What should I do if
white or rust colored
spots appear in the
product?
The white or rust colored spots are limescale, it is recommended to
descale the product every four weeks to keep it working effici tly.
In areas with hard water, you may need to descale more often. The
limescale deposits can be removed by immersing the product in vinegar or
a descaler. Rinse the product well after the limescale has disappeared.
The temperature
controller is not
precise.
Actual temperature is affected y environmental factors such as height
above sea level, atmospheric pressure, initial bottle temperature, and
room temperature. Under the influence f the atmospheric pressure and
the room temperature, there will be ± 5C deviation. We also recommend
that you cover the lid to retain the heat.
Heating time is too
long.
Check if you have added too much water, which affects the he ting time,
and reduce the volume of water that reaches half the milk level in the
bottle.
Note: If you have a warranty, please contact Koalaa customer service before leaving a review.
7. Troubleshooting
