9
EasyReader control panel
5
7
8
9
10
11
12
3
4
6
1
2
9
Volume
Turn up volume: Briefly press
button 2
.
Turn down volume: Briefly press
button 3.
When the device is paused, you will hear the help message „louder“ or „quieter“ . When the
device is reading out, the volume will increase or decrease.
The volume of the device cannot be t urned off. You will hear a sign al when having reached
minimum volume.
Reading speed
Faster: Briefly press
button 4
to increase the reading speed.
Slower: Briefly press
button 5
to decrease the reading speed.
When the device is pa used, yo u will hear the message „faster“ or „slower“. When the
device is in t he process of readin g ou t, y ou will hear a short beep and the speed will
either increase or decrease.
Normal reading speed is signalled by a do uble beep during reading or by the m eassage
„normal speed“ when the device is paused.
Scan page
Press
button 6
to scan a page. A page must be scanned before it can be read out.
A tune will signal that the device is operat ing when scanning. You can t urn off the tune by
holding either speed buttons pressed in until the device gives a signal.
You can already have a new sheet scanned while the previous one is still being read out. You
will hear a beep if the machine starts to scan. The machine will automatically the next after
the existing page is terminated.
Pause/start the reading
Press
button 8
to start or pause the reading.
Navigation
The reading dev ice f eatures Daisy st ructure navigation: 5 blue butt ons in two crossing
straight lin es. Th e upper an d low er arrow- shaped but tons are f or select ing the n avigation
mode. The arrow-shaped buttons on the right ar e for navigating forward or back. The round
blue button in the centre is for pausing or starting the device.
