OPERATING INSTRUCTIONS
In order to avoid serious injury, the operator and
unit must be in a stable position when starting the
snow shovel.
Follow this sequence exactly in order to start the
snow shovel.
• Verify that the battery pack is inserted into the
battery compartment.
• Press and hold the lock-out button (K).
• While holding the lock-out button (K), press and
hold the trigger switch (L).
Note
: The lock-out button must be engaged before
the trigger switch is active. Once the trigger switch
is engaged, release the lock-out button.
• Hold the handle and begin to use the snow
shovel.
1. ADJUSTING THE AUXILIARY HANDLE POSITION
• Position the front/auxiliary handle (I) onto the
upper portion of the shovel section by sliding
over the rubber sleeve (J).
• Once the front handle is in the desired position,
slide the bolt (CC) through the underside of the
handle and secure with the fastening knob (AA).
Tighten until there is no movement in the handle.
• The front handle can be adjusted to a suitable
position.
2. STARTING THE SNOW SHOVEL
M
N
O
1
AA
2
K
L
I
CC
J
11