• Remove the right side
cover by removing 6
screws.
• Pull the belt tensioner
(idler arm) away from
the drive pulley. Be sure
not to lose the washer
and screw left.
• Remove the belt.
• Remove the 4 screws .
• Remove the left side
cover by removing 6
screws.
• Remove the nut that
secures the left side
plate.
• Remove the impellor
shaft with pulley
assembly attached.
• Discard the old/damaged
impellor. Be sure not to
lose the shaft sleeve that
secures the left side of the
shaft.
• Insert the impellor shaft
with pulley assembly
attached in the new
impellor. Be sure to
replace the retained
shaft sleeve that secures
left side of the shaft.
3. IMPELLOR REPLACEMENT
CARE AND MAINTENANCE
3a
3b
3c
3d
3e
3f
3g
3h
3i
14