10
OPERATING INSTRUCTIONS
3. Variable-speed Trigger Switch
a. To turn the angle impact wrench ON, depress
the trigger switch (C).
b. To turn it OFF, release the trigger switch.
c. The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
4. LED Worklight
The LED worklight (D), located on the base of
the angle impact wrench, will illuminate when
the trigger switch is depressed. This provides
additional light on the surface of the workpiece for
operation in lower-light conditions.
The LED worklight will turn off after approximately
10s when the trigger switch is released.
a. The LED worklight will blink rapidly if the
tool has stopped working in order to protect
internal circuits; please wait for the tool to cool
down, at which point it can be started again.
b. The LED worklight will blink slowly to indicate
that the battery charge is very low.
5. Installing and Removing Socket
a. Remove the battery pack.
b. To install a 3/8 in. socket (not included), simply
push it completely onto the square anvil (A).
c. To remove the socket, pull it off.
WARNING:
Only use sockets designed for
impact wrenches. Sockets not designed for impact
wrenches could break and result in user injury.
Inspect sockets prior to use to ensure that they
have no cracks or other visible damage.
5
3
C
4
D
Summary of Contents for 1332912
Page 14: ...14 Printed in China ...
