13
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery from the tool. For safe
and proper operation, always keep the tool and its ventilation slots clean.
Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease.
Always use only a soft, dry cloth to clean your cut-out tool; never use detergent or alcohol.
TROUBLESHOOTING
WARNING
• Turn the switch to the center/off position, remove the battery before performing
troubleshooting procedures.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The work light does
not work.
Low battery capacity.
Charge the battery pack.
Bit couldn’t be
installed.
Improper collet size was
not installed.
Use the proper collet according to the
instruction manual.
WARRANTY
For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
Printed in China
