Kobalt 1447232, Manual

6

SAFETY INFORMATION

•  Avoid body contact with earthed or grounded surfaces such as pipes, radiators, 

ranges and refrigerators. 

There is an increased risk of electric shock if your body is 

earthed  or grounded.

•  Do not expose power tools to rain or wet conditions.

 Water entering a power tool will 

increase the risk of electric shock.

•  Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, sharp edges or moving parts. 

Damaged or 

entangled cords increase the risk of electric shock.

•  When operating a power tool outdoors, use an extension cord suitable for outdoor 

use. 

Use of a cord suitable for outdoor use reduces the risk of electric shock.

•  If operating a power tool in a damp location is unavoidable, use a residual current 

device (RCD) protected supply. 

Use of an RCD reduces the risk of electric shock

.

Personal Safety
•  Stay alert, watch what you are doing and use common sense when operating a power 

tool. Do not use a power tool while you are tired or under the influence of drugs, 

alcohol or medication. 

A moment of inattention while operating power tools may result in 

serious personal injury.

•  Use personal protective equipment. Always wear eye protection. 

Protective equipment 

such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for 

appropriate conditions will reduce personal injuries

•  Prevent unintentional starting. Ensure the switch is in the off-position before 

connecting to power source and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or energizing power tools that have the 

switch on invites accidents.

•  Remove any adjusting key or wrench before turning the power tool on. 

A wrench or a 

key left attached to a rotating part of the power tool may result in personal injury.

•  Do not overreach. Keep proper footing and balance at all times. 

This enables better 

control of the power tool in unexpected situations.

•  Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing 

away from moving parts. 

Loose clothes, jewelry or long hair can be caught in moving 

parts.

•  If devices are provided for the connection of dust extraction and collection facilities, 

ensure that these are connected and properly used. 

Use of dust collection can reduce 

dust-related hazards

•  Do not let familiarity gained from frequent use of tools allow you to become 

complacent and ignore tool safety principles. 

A careless action can cause severe injury 

within a faction of a second.

Power tool use and care
•  Do not force the power tool. Use the correct power tool for your application. 

The 

correct power tool will do the job better and safer at the rate for which it was designed.

•  Do not use the power tool if the switch does not turn it on and off. 

Any power tool that 

cannot be controlled with the switch is dangerous and must be repaired.

•  Disconnect the plug from the power source and/or remove the battery pack, 

if detachable, from the power tool before making any adjustments, changing 

accessories, or storing power tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

•  Store idle power tools out of the reach of children and do not allow persons 

unfamiliar with the power tool or these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.