27
INSTRUCCIONES DE FUNCIONAMIENTO
6. Selector de modo
El selector de modo (C) le permite configurar
la herramienta para varias aplicaciones de
perforación y perforación con percusión.
Rote el selector hacia arriba o hacia abajo, según
la aplicación.
Modo atornillado
: para atornillar tornillo.
Modo taladro
: para taladrar maderas,
metales, plásticos u otros materiales.
Modo martillo
: para taladrar con acción
percutora en concreto, ladrillo o materiales duros
similares.
AVISO:
No cambie la configuración de modo mientras la herramienta esté en funcionamiento.
7. Torsión ajustable
El embrague de torsión ajustable (B) se puede
configurar en cualquiera de las 24 configuraciones
de torsión cuando la herramienta está en el modo
atornillado
.
Regule la fuerza de torsión girando el embrague
de torsión.
A mayor configuración de torsión, mayor fuerza
produce el taladro percutor para girar un objeto.
La configuración correcta depende del trabajo y
del tipo de broca, sujetador y material que utilice.
En general, use una fuerza de torsión mayor para
tornillos más grandes. Si la torsión es demasiado
elevada, los tornillos podrían dañarse o quebrarse.
No se puede ajustar la torsión en los modos taladro ni martillo.
PRECAUCIÓN
• No cambie la configuración de torsión mientras la herramienta está en funcionamiento.
6
C
7
B