8
OPERATING INSTRUCTIONS
1. Battery Pack
To Attach Battery Pack
1.
Align the raised rib on the battery pack with the
grooves in the battery pack port (R), then slide
the battery pack into the unit.
2.
Ensure that the battery-release buttons on the
battery pack snap into place and the battery
pack is secured to the unit before beginning the
operation.
NOTICE:
When placing the battery pack on the
tool, be sure that the raised rib on the battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of the
battery pack can cause damage to internal components.
To Detach Battery Pack
1.
Press the battery-release buttons to release the battery pack.
2.
Pull the battery pack to remove it from the tool.
2. To Use Supplied AC Power Adaptor
Insert the AC power adaptor plug into the DC
Socket (C) on the top of the radio. Plug the adaptor
(T) into a standard power outlet. Whenever the
power adaptor (T) is connected, the battery pack
is automatically disconnected. The AC adaptor (T)
should be disconnected from the power outlet when
not in use. Close the rubber cover to protect the DC
Socket (C) from dust, dirt, and moisture.
NOTE:
The battery pack cannot be charged using
the power adaptor (T). The battery pack can only
be charged using chargers specified earlier in this
manual.
3. To Connect an External Player to AUX Input
Port
a. Select the AUX operating mode using the mode
button (I).
b. Insert the AUX cable (U) into the AUX input
port (Q) and make sure that they are properly
connected.
c. Connect an MP3 player, CD player, or other
audio device directly to the unit, using the AUX
cable (U).
d. Switch on the external audio device and start
the playback.
e. Adjust the volume with the regulator on the
external audio device or the volume buttons of
the unit.
2
C
3
Q
U
1
Battery-release
Buttons
R
