14
kobalttools.com
OPERATING INSTRUCTIONS
6. Depth-Of-Cut Adjustment
WARNING:
Always maintain the correct
blade-depth setting.
The correct blade-depth setting for all cuts should not
!
than 1/4 in. (6.5 mm).
Greater blade depth will increase the chance of kickback,
and cause the cut to be rough.
a. Remove the battery pack from the saw.
b. Raise the depth-locking lever (L) to release it.
c. Determine the desired depth of cut.
^ ?@ %!
and raise or lower the saw until the indicator mark on
the saw aligns with the desired depth on the depth
scale (M).
e. Lower depth-locking lever to lock it into position.
7. Adjusting the Cutting Angle
a. Loosen the bevel-locking knob (E), located on the
0°-50° bevel scale (F) on the base plate (J).
b. Tilt the body of the saw until the required angle is
reached (refer to the 0°~50° bevel scale).
c. Tighten the bevel-locking knob to secure the saw and
angle.
6
L
M
6
7
E
J
F
