9
kobalttools.com
OPERATING INSTRUCTIONS
\ J0]=
The drill/driver has a two-speed gear box designed
for drilling or driving at two different variable-speed
ranges. A gear selector (F) is located on the top of the
drill/driver to select either
1
(Low) or
2
(High) speed.
When set to
1
, the drill/driver will deliver lower speeds
and increased power and torque.
When set to
2
, the drill/driver will deliver higher speeds
and reduced power and torque.
Use
1
for high power and high torque applications and
2
for fast drilling or driving applications.
Use
1
for starting holes without a center punch, drilling
metals, plastics or ceramics, or in applications that
require a higher torque.
2
is better for drilling wood and wood composites and
for using abrasive and polishing accessories.
NOTICE:
Never change gears while the tool is running.
Failure to obey this caution could result in serious damage
to the drill/driver.
NOTICE:
Avoid running the drill/driver at
1
speed for
extended periods of time. Running at
1
speed under
constant use may cause the drill/driver to become
overheated. If this occurs, cool the drill/driver by running it
without a load at
2
speed.
3
F
F
