12
1. To turn on:
OPERATING INSTRUCTIONS
To avoid injury:
• Do not squeeze the trigger while the
er is inverted.
• Do not carry the
er with your finger on the switch. Avoid unintentional starting.
CAUTION:
Always allow 5 seconds or more for
the blade to stop rotating after releasing the trigger.
Do not invert the edger or place your hands under
the protective guard until the edger blade has come
to a complete stop.
WARNING
3
4a
B
b.
a.
Press the lock-off lever (C). Squeeze the trigger (B)
Push the safety lock-out switch (D) forward to unlock.
to start.
a. Release the trigger (B) .
b. Pull the safety lock-out switch (D) rearward to lock.
a. Remove the battery pack.
d. Tighten the depth adjustment knob.
b. Loosen the depth adjustment knob to increase or
decrease the depth.
c. Adjust the depth so that the blade barely touches
the ground when the machine is held in a normal
operating posture.
C
D
Depth Adjustment Knob
2. To adjust the depth of cut:
e. Standing in a normal working position, check the
depth of cut again and correct if necessary.
f. Replace the battery pack once all adjustments are
complete.
To turn off:
Lock
Unlock
4b
Blade
Wheel
