background image

9

SAFETY INFORMATION

Child safety

Tragic accidents can occur if the operator is not aware of the presence of children.

age or older must read and understand the operating instructions and safety rules in this manual 

and must be trained and supervised by a parent.

Do not allow children under the age of 14 to operate this 

Edger

. Children who are 14 years of 

may obscure your view of a child who may run into the path of the 

Edger

.

SAVE THESE INSTRUCTIONS

Use the Correct Appliance – Do not use appliance for any job except that for which it is intended.

When battery pack is not in use, keep it away from other metal objects like paper clips, coins, 

keys, nails, screws or other small metal objects that can make a connection from one terminal to 

another. Shorting the battery terminal together may cause burns or a fire.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or 

temperature above 265°F may cause explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside of the 

temperature range specified in the instructions. Charging improperly or at temperatures outside of 

the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This 

will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as 

Don’t grasp the exposed cutting blades or cutting edges when picking up or holding the appliance.

indicated in the instructions for use and care.

Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts. Use 

of rubber gloves and substantial footwear is recommended when working outdoors. Wear 

protective hair covering to contain long hair.

Ambient temperature range:

-     Battery 

-     Edger storage temperature range: -4°F (-20°C) - 158°F (70°C) 

-     Edger operation temperature range: 6.8°F (-14°C) - 158°F (70°C) 

harging temperature  ange:  39°F (4°C) - 104°F (40°C)

-     Charger  peration  emperature  ange:  39°F (4°C) - 113°F (45°C)

-     Battery  ischarging temperature  ange:  6.8°F (-14°C) - 113°F (45°C)

Stay alert and turn the 

device

 off if a child or any other person enters the working area.

Summary of Contents for KE 2080-06


















Reviews: