Kobalt KSB 6040-06 Operation Manual Download

Page: 5 / 22

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their mean-

ing. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS NAME

DESIGNATION/EXPLANATION

Volts

Voltage

Amperes

Current

Hertz

Frequency (cycles per second)

Watt Hour

Energy Storage Capacity

Amp Hour

Current Capacity

Direct Current

Type or a characteristic of current

RPM

Rotating Speed

Revolutions per minute

/min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

Wet Conditions Alert Do not expose to rain or use in damp locations.

Read The Operator’s
Manual

To reduce the risk of injury user must read and understand
operator’s manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply
with ANSI Z87.1 when operating this equipment.

Safety Alert

Precautions that involve your safety.

Hand and Feet

Keep hands and feet away.

Safe Distance

Keep bystanders a safe distance from the machine.

Stop the Machine

Stop the motor and remove the battery before leaving the
machine.

Moving Parts

Stay away from moving parts. Keep all guards and
shields in place.

Thrown objects

Thrown objects can ricochet and result in personal injury or
property damage.

Hand and feet

Keep hands and feet away from rotating impeller.

Hand

Keep hands away from the discharge area.

Summary of Contents for KSB 6040-06























Search results

Summary of Contents for KSB 6040-06

Reviews:

Related manuals for KSB 6040-06

Brands by name

Popular brands

Kobalt KSB 6040-06, Operation Manual

Search results

Summary of Contents for KSB 6040-06

Reviews:

Related manuals for KSB 6040-06

Brands by name

Popular brands