background image

kobalttools.com

9

SAFETY INFORMATION

Child safety

Tragic accidents can occur if the operator is not aware of the presence of children.

•  Keep children out of the working area and under the watchful care of a responsible adult.

•  Do not allow children under the age of 14 to operate this trimmer. Children who are 14 years of 

age or older must read and understand the operating instructions and safety rules in this manual 
and must be trained and supervised by a parent.

•  Stay alert and turn the trimmer off if a child or any other person enters the working area.

•  Look behind and down for small children before and while cutting backwards.

•  Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that 

may obscure your view of a child who may run into the path of the trimmer.

WARNING (Proposition 65)

Some dust created by power sanding, sawing, grinding, drilling and other construction activities 
contains chemicals known to the state of California to cause cancer, birth defects or other 
reproductive harm. Some examples of these chemicals are:

•   Lead from lead-based paints,

•   Crystalline silica from bricks and cement and other masonry products,

•   Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce 
your exposure to these chemicals: work in a well-ventilated area, and work with approved safety  

equipment, such as dust masks that are specially designed to filter out microscopic particles.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package 
contents list and hardware contents list. If any part is missing or damaged, do not attempt to 
assemble the product.

Tools Required for Assembly: 

•    Phillips screwdriver (not included).

Estimated Assembly Time: 5-10 minutes

Summary of Contents for KST 140XB-06






















Reviews: