4
Be aware of excess hose left in working area or work surface.
Do not abuse hoses or connectors.
Never yank on the air hose system.
Keep hoses away from heat, oil, and sharp edges.
Check hoses for weak or worn connections before each use and make sure that all connections
are secure before use.
Never store flammable liquids or gases near air compressor or other compressed materials
under pressure.
Always disconnect tool from air supply before performing any maintenance.
Never use a tool which is leaking air, has missing or damaged parts, or requires repair.
Only use parts and accessories recommended by the manufacturer.
SAFETY INFORMATION
●
LEAD FROM LEAD BASED PAINTS
●
CRYSTALLINE SILICA FROM BRICKS, CEMENT AND OTHER MASONRY PRODUCTS
●
ARSENIC AND CHROMIUM FROM CHEMICALLY TREATED LUMBER
YOUR RISK FROM THESE EXPOSURES VARIES, DEPENDING ON HOW OFTEN YOU DO
THIS TYPE OF WORK. TO REDUCE YOUR EXPOSURE TO THESE CHEMICALS WORK IN A
WELL VENTILATED AREA, AND WORK WITH APPROVED SAFETY EQUIPMENT, SUCH AS
A RESPIRATOR OR DUST MASKS THAT ARE SPECIALLY DESIGNED TO FILTER
MICROSOPIC PARTICLES.
WARNING
SOME DUST CREATED BY PAINT SPRAYING, POWER SANDING, SAWING, GRINDING,
DRILLING, AND OTHER RELATED ACTIVITIES IS KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER, BIRTH DEFECTS, AND OTHER REPRODUCTIVE HARM. A LISTING OF
CHEMICALS CAN BE OBTAINED FROM www.oehha.ca.gov UNDER PROPOSITION 65. SOME
EXAMPLES OF THESE CHEMICALS ARE:
It’s always recommended to have a fire extinguisher and first aid kit near work area.
Keep proper footing at all times. Do not overreach, as slipping, tripping, and/or falling can be a
major cause of serious injury and/or death.
KEEP CHILDREN AWAY FROM WORK AREA AND TOOL:
Keep tool out of reach of children and never allow children to handle equipment or tool.
Keep work area clear from clutter and other work hazards.
Do not use this product in unsafe work conditions.
Only use a tool for its intended function.
Never operate tool if under the influence of drugs or alcohol.
Never operate any tool if you are tired or unable to keep control of tool at all times.
ADDITIONAL SAFETY GUIDELINES
Every tool has a unique function and is designed to operate in a specific way.
Never exceed the recommended PSI of the air tool.
Make sure any accessories used are compatible with the air tool, and can meet or exceed the PSI
requirements of this air tool.
