KOBE KLF010, Operator'S Manual

BEFORE OPERATING THE FLOODLIGHT, PLEASE ENSURE THAT ALL SAFETY INSTRUCTIONS HAVE BEEN 
READ AND UNDERSTOOD, AND THE LIGHT HAS BEEN ASSEMBLED CORRECTLY FOLLOWING THE BELOW 
GUIDELINES.

ASSEMBLY:
1.  

Fix the floodlight body (7) securely to the stand (3) by locating and tightening the thumb screw (4).

OPERATING:
1.  

Before first use, ensure the floodlight has been fully charged (See charging section below).

2.  

Direct the lens away from your eyes before switching on.

3.  

To turn the floodlight on press the rocker switch (5) into the “ ” position.

4.  

To turn off press the rocker switch (5) into the “0” position.

5.  

To adjust the floodlight head make sure the floodlight is off. Then loosen the thumb screws (4).

6.  

Tilt the floodlight head into required position then tighten the thumb screws (4) to secure position. 

KOBE

ELECTRICAL

APPLIANCES

OPERATING

5

4

Time required to fully charge the battery is 5 hours. 
Battery operation time, up to 3 hours

l  

Charge the battery before use, ensuring floodlight is turned off during charging.

l  

AC/DC ADAPTER:

 Connect the charger into the charge socket at the back of the floodlight (6), then  

plug the mains plug into the power supply. 

l  

CAR ADAPTER:

 Plug the charger into the charge socket at the back of the floodlight (6), and plug the  

car charger into the cigarette lighter socket in your car (lorry or boat). 

Note:

 Charging the floodlight from a  

12V vehicle socket will drain the vehicle’s battery unless the engine is running.

The red LED on the charger will illuminate to indicate that charging is taking place.
NB: When charging is complete (approx 5 hours), the charging indicator will turn green.
Disconnect the charger from the lamp when it has been sufficiently charged.

KOBE

ELECTRICAL

APPLIANCES

CHARGING

Use only a mild soap and a damp cloth to clean the floodlight. Never let any liquid get inside the floodlight. 
Never immerse any part of the floodlight into water or a liquid. Make sure the floodlight is completely dry 
before using it.

To assure product safety and reliability, repairs, maintenance and adjustment should be performed by a 
qualified engineer, always using identical replacement parts.

KOBE

ELECTRICAL

APPLIANCES

MAINTENANCE

Order code

 . . . . . . . . . . . . . . . . . . KBE-282-5500K 

Model number

 . . . . . . . . . . . . . . . . . . . . . 

KPW010

Power

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10W

Lumen output

 . . . . . . . . . . . . . . . . . . . . .  >700Lm

Charging time*

 . . . . . . . . . . . . . . . . . . . . . . .  5hrs

Operating time

 . . . . . . . . . . . . . . . . . . . . . . .  3hrs

Operating temperature

 . . . . . . . . . . . .   -20˚C˜45˚C 

Input voltage

 . . . . . . . . . . . . . . . . . . . . . . 8.4V DC

Adapter input

 . . . . . . . . . . . 100-240V AC 50/60HZ

Emitting colour

 . . . . . . . . . . . . . . . . White (6500K)

Moisture protection

 . . . . . . . . . . . . . . . . . . . . IP65 

Beam angle

 . . . . . . . . . . . . . . . . . . . . . . . . . . 120˚ 

Net weight

 . . . . . . . . . . . . . . . . . . . . . . . . . 1.08kg

Dimensions

 . . . . . . . . . .250(H) x 145(W) x 165(D)mm

ELECTRICAL DATA

In the United Kingdom, the

 ELECTRICITY AT WORK ACT 1989 

requires all portable electrical appliances, if 

used on business premises, to be tested by a qualified electrician, using a Portable Appliance Tester (PAT), 
at least once a year.  
The 

HEALTH & SAFETY AT WORK ACT 1974

 makes owners of electrical appliances responsible for the 

safe condition of  the appliance and the safety of its operator. If in any doubt about electrical safety, contact 
a qualified electrician.

ELECTRICAL SAFETY

An RCCB (Residual Current Circuit Breaker) should be fitted in the mains electricity distribution board. If the 
power supply is not protected by an RCCB, it is highly recommended that an RCD (Residual Current Device) 
is used with all portable electrical products.

KOBE

ELECTRICAL

APPLIANCES

ELECTRICAL SAFETY

KOBE

ELECTRICAL

APPLIANCES

SPECIFICATIONS

It is recommended that you save the packaging material for future transportation of the Portable Floodlight 
in the event of service or repair.

Packaging materials, especially bags, must be kept well away from babies and children.

KOBE

ELECTRICAL

APPLIANCES

UNPACKING

KOBE

ELECTRICAL

APPLIANCES

IDENTIFICATION

1. 

COB LED

2. 

Padded Handle

3. 

Stand

4. 

Angle adjustment  

thumb screws

5. 

On/off button

6. 

Jack inlet

7. 

Floodlight body

6

1

4

5

4

4

2

3

7