3-19
［
3.3
STARTING ENGINE
WHEN STARTING ENGINE
After making sure that no one is near the machine and no obstruction is left around the machine, sound horn and
start the engine.
• Do not hold the starter key switch in the START position for more than 15 seconds. If the engine does not start,
return the starter key switch to the OFF position, wait 30 seconds, and then try it again.
• When starting engine, if warning is displayed on the monitor, stop engine immediately and identify the cause,
and then repair it if necessary.
• After the auto idling stops, when necessary to restart the engine, start the engine after returning the starter key
switch to ACC or OFF once and the throttle potentiometer to the low idling position. But it is impossible to start
the engine again until the buzzer stops sounding after the engine stops.
3.3.1
START-UP UNDER NORMAL TEMPERATURE CONDITIONS
B
A
1
1.
Make sure control lock lever (1) is in the "LOCKED"
position.
A: "LOCKED" position
B: "UNLOCKED" position
2.
Make sure all control levers are set to the
"NEUTRAL" positions.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
