4-7
4.3.3
ABOUT MANUAL REGENERATION
When this warning is displayed on the monitor, perform manual regeneration immediately.
• The exhaust gas cleaning device starts the automatic regeneration after a certain amount of time has passed,
but it may not be completed in some operating conditions.
When the automatic regeneration is not completed and a certain amount of time has passed, the above warning
is displayed and the warning sounds. In that case, perform the manual regeneration in the following procedures.
• When the manual regeneration is not performed, the exhaust gas cleaning device fails and the engine speed is
restricted.
OPERATION METHOD
• Immediately after the machine operation and during the regeneration, the temperature around the exhaust pipe
and muffler and of the exhaust gas are very high. Putting any combustible materials close to these hot parts,
could cause a fire. Touching hot exhaust gas may cause burns.
•
1.
Move the machine to a safe place.
2.
Place the machine in the parking position and move the pilot control shut-off lever to the "LOCKED" position.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
