7 Options
32
7.3 Anti-starter with key
• The machine can be fitted when this option is requested.
• The immobilizer key consists of an immobilizer box and a key reader installed in the
cockpit.
• For more information, consult the instructions supplied with the device.
1. To start the engine, insert the MED electronic key
into its housing, remove it and start the engine within
30 seconds.
Note
Once the time has passed, repeat the whole
procedure.
2. The anti-start mechanism is triggered 30 seconds
after the contact key is turned to OFF.
7.4 Quick hitch
CAUTION
Before any connection or disconnection of the hydraulic hoses, remove the residual pres-
sure from the hydraulic circuit.
2.1.1 Removing the residual pressure, page 103
Connecting
1. Insert the adapter into the receiver.A slight click
indicates that the connection is successful. The ball
is released from the adapter groove located on the
receiver.
2. Turn the adapter on the receiver to secure the
connection.
Note
Before each use, clean the receiver surfaces.
Disconnecting
To disconnect, turn the adapter to align the ball with the groove located on the receiver and slide
the adapter backwards.
[S2PU00027ZE02] [1204CsCshWbYs]
Summary of Contents for SK17SR
