72
9
H
ANDLING THE BUCKET
9.1 Machine stability when using with a bucket or an
accessory
• The maximum weight when in use in bucket mode or with accessories ensure machine dy-
namic stability in use. It corresponds to the maximum weight allowed at the end of the empty
arm.
• This weight is determined for the machine on a flat and firm ground under the most unfav-
ourable conditions and is indicated in the table below.
950 mm
-
105
-
190
-
• It must absolutely be taken into account by the operator before using the machine for exca-
vation, levelling operations or in working conditions with the accessories.
• Depending on the machine configuration (arm length, presence of a counterweight…) and
working conditions, the operator must make sure that :
– The equipment and accessories selection is made according to the nature of the task to
be carried out and according to the machine's stability limits.
– the total weight of the quick hitch, the accessories used (bucket, hydraulic hammer...)
and the load handled does not exceed the maximum weight allowed.
• The capabilities of the machine are given for a working position with the undercarriage ex-
panded to give the machine more stability.
WARNING
Using the machine with the undercarriage retracted must be limited to moving without
rotation of the turret. This use is under the responsibility of the user and is strongly
discouraged.
DANGER
Any
excess
can
lead
to
a
loss
of
stability
of
the
machine
and
tip
it
over.
KOBELCO
CONSTRUCTION
MACHINERY
CO.,
LTD.
accepts
no
responsibility
in
case
of
non
compli-ance
with
the
safety
instructions
described
in
this
chapter.
WARNING
When using the machine with a heavy accessory (bucket in loader mode or log loader for
example) associated with travel movement, the maximum weight guaranteeing the stabil-
ity of the machine and the loads shown in the lifting table must be reduced by 20%.
[S2PU00027ZE02] [1204CsCshWbYs]
Summary of Contents for SK17SR
