81
11 Accessory change by direct coupling
1. Clean and lubricate the bores.
2. Put the o-rings in place.
3. Align the pin bore with the bucket A bore.
Add shims to compensate for play if necessary.
4. Insert the swivel pin into bore A.
5. Lift the equipment and align the arm bore with the bucket B bore holding the bucket about
5 cm of the ground.
Add shims to compensate for play if necessary.
6. Insert the swivel pin into bore B.
7. Put the bolts in place on axes A and B.
8. Grease the hinged parts.
11.2.1 Loading bucket
IMPORTANT
Protect the various elements from dirt and dust.
Take care not to damage seals on each bushing side.
1 = Arm
2 = Bucket link
[S2PU00027ZE02] [1204CsCshWbYs]
Summary of Contents for SK17SR
