Dynamic Acera 03/05 Rev. 05
Page 3-32
Temperature Setting Switch and Display FIG-
URE 3.20.a
a.
The set temperature is ndicated indigits
on LCD display.Temperature set range
is 18.5 °C (65.3 °F) to 31.5 °C (88.7 °F).
b.
Press the two temperature set switches
simultaneously for 5 seconds to change
the display from Centigrade (°C) to Fahr-
enheit (°F) or viceversa in the LCD dis-
play. (Eg.) 5°C (77 °F) or (77 °F) 25 °C.
c.
Press temperature set switch DOWN or
UP to change the set temperature. The
temerature goes up or down by 0.5 °C
(0.9 °F) in graduation.
d.
The set temperature 18 °C (64.4 °F) is
the lowest cooling temperature, and 32
°C (89.6°F) is the highest heating tem-
perature. Control beyond either of these
limits is not possible.
Air Outlet Mode Selector Switch and Display
FIGURE 3.20.b
a.
Air outlet position is indicated by the ar-
row on LCD display.
b.
Press Air Outlet Mode Switch in the con-
dition where auto display light is on, and
the display mode is fixed. “AUTO ”indi-
cator lamp on LCD display goes out,
and “AUTO ” control of air outlet open-
ing is released. Press it again, and the
level s changed to:
FIGURE 3.20.a
FIGURE 3.20.b
MACHINE FAMILIARIZATION
VENT
→
BI-LEVEL
→
FOOT
→
FACE.
