Dynamic Acera 03/05 Rev. 05
Page 3-38
MACHINE FAMILIARIZATION
FIGURE 3.30.a
5. Heavy Lift Switch – FIGURE 2.30.a
The heavy kift switch is located on the
left hand control console. The heavy lift
switch has 2 operating functions. The
heavy lift function is used when preci-
sion control of heavy lifting operations
is required.
a.
“ON ”– Push the symbol side of switch
down to turn heavy lift function on.
b.
“OFF ”–Push back of switch down to turn
heavy lift function Off.
NEVER TURN OFF HEAVY LIFT SWITCH
DURING ANY HEAVY LIFTING OPERATION.
SUDDEN OR UNEXPECTED LOAD MOVE-
MENT COULD RESULT IN SERIOUS IN-
JURY OR DEATH.
DANGER
REAR PANEL AND OTHERS
1. Swing Parking Brake Release Switch
FIGURE 3.30.b
After removing 4 cover set screws on the
rear side of operator seat, release the locks
(5 places) of cover section, and remove the
upper cover exposes switch. Swing parking
brake is normaly in the locked position. The
swing parking brake is released in swing and
arm in operation. When the swing function be-
comes inoperable due to a malfunction, turn
toggle switch to “RELEASE LOCK” position,
and the parking brake will be released. Move
machine to a safe area immediately and con-
tact an authorized Kobelco Dealer ’s
Ser-
vice Department for assistance. Return the
toggle switch to “NORMAL” position after re-
pairs are completed.
( Note: With the swing parking brake in re-
lease position machine will not “Free Swing”
as control valve swing spool is still closed,
machine will just drift more on slope during
static operation. )
FIGURE 3.30.b
SK210 Shown for Reference
HEAVY LIFT
SWITCH
KPSS and Swing Release Switches
