a.
The set temperature is indicated in digits
on LCD display (5). Temperatuer set
range is 18.5C degrees (65.3F degrees) to
31.5C degrees (88.7F degrees).
b.
Press the two temperature set switches (7)
simultaneously for 5 seconds to change
the display from Centigrade (C degrees) to
Fahrenheit (F degrees) or viceversa in the
LCD display.
(Eg.) 25C degrees --> 77F degrees or 77F
degrees --> 25C degrees
c.
Press temperature set switch DOWN or
UP to change the set temperature.
The temperature goes up or down by
0.5C degrees (0.9F degrees) in graduation.
The set temperature may be raised or
lowered by continued pressing of the switch.
d.
The set temperature 18.5C degrees (65.3F
degrees) is the lowest cooling temperature,
and 31.5C degrees (88.7F degrees) is the
highest heating temperature.
Control beyond either of these limits is not
possible.
(1) Air outlet position is indicated by the arrow
on LCD display.
(2) Press air outlet mode switch (8) in the
condition where auto display light is on,
and the display mode is fixed, "AUTO"
indicator lamp on LCD display goes out,
and "AUTO" control of air outlet opening is
released.
Press it again, and the level is changed to
VENT --> BILEVEL --> FOOT --> FACE
3. Temperature Setting Switch and Display
4. Air Outlet Mode Selector Switch and Display
［
2. MACHINE FAMILIARIZATION
］
2-50
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]
