A. Operator Weight Adjustment
Rotate the adjustment knob (1) until weight
close to the operator's weight is at the top
end of the dial. (Not equipped in Asia.)
B. Seat Height Adjustment
1.
Pull height adjustment lever (2) up to raise or
lower rear of seat.
2.
Push height adjustment lever (2) down to raise
or lower front of seat.
C. Seat Reclining Adjustment
1.
Pull reclining adjustment lever (3) up to set
desired reclining angle.
2.
Release reclining adjustment lever to lock seat
in position.
D. Seat Front to Back Adjustment
Pull up on seat adjustment bail (4) and move
seat forward or backward to desired position
E. Arm Rest Adjustment
Lower arm rest (5) and with finger, turn
adjustment wheel until arm rest is in desired
position.
To fine-adjust the angle of arm rest, turn control
dial (8).
F. Head Rest Adjustment
1.
Move head rest (6) forward or backward to
desired reclining angle.
G. Lumber Support (7)
It is possible to adjust the force which is
supporting the lumber in 5 steps by turning
the knob in counterclockwise. With turning the
knob in counterclockwise the supporting force
is raised and returns to the condition before
adjustment at 6th step.
2.3.10
OPERATOR SEAT
The operator seat incorporates several adjustment mechanisms to insure operator comfort, ease of
operation and operator safety. The adjustment areas are as follows.
When adjusting the operator seat, pay attention to hands in order not to be caught between handle
and seat.
[
2. MACHINE FAMILIARIZATION
]
2-54
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]