1.
Turn and hold starter key switch (1) to
"ON" position
2.
If engine coolant temperature gauge points
out to 10 degree or less, this machine
starts to preheat the glow plug
automatically.
3.
Start the engine by the procedure 3. to 6.
explained in the section "Startup in ordinary
temperature" within 5 seconds or less after
completion of preheating.
4.
After engine starts, to prevent the
occurring of white smoke exhaust, the
preheating continues and stops
automatically.
A. Start-Up Under Normal Conditions
1.
Make sure that safety lock lever (1) is set to the "LOCKED" (Up) position.
A. Locked (Up) Position
B. Unlocked (Down) Position
2.
Make sure all control levers are set to the "NEUTRAL" position.
3.
Set throttle potentiometer (2) to low idling position.
4.
Turn the starter key (3) to "ON" position, and confirm the operating condition of multi-display.
5.
Turn the starter key switch (3) to the START position to start the engine and release after starting
the engine.
6.
Release the starter key switch immediately after the engine starts.
The starter key switch will return to the "ON" position by itself.
B. Start Up in Cold Conditions
In cold weather, due to the increase in oil viscosity and decrease in battery performance, starting the
engine may be difficult. Use the preheater to start the engine easily under these conditions.
For the engine start procedure with auto warming up system, see "2.3.1.B.8.1
Auto Warming Up".
[
3. MACHINE OPERATION
]
3-14
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]