5.
Pull up safety lock lever (4) to "LOCKED (UP)"
position.
6.
When necessary to leave from the machine,
close windows, cab door and each door, and
then lock it.
1.
If warnings of engine coolant and engine oil
pressure are displayed, move the machine
to a safe place and stop the engine. And
then repair it according to applicable
procedure in Chapter 4 "INSPECTION &
MAINTENANCE CHART".
2.
Check for any oil or coolant leakage.
Check the attachment, exterior, and travel
system components. If leakage and damage
are found, repair it immediately according to
applicable procedure in Chapter 4
"INSPECTION & MAINTENANCE CHART".
3.
Fully refill with fuel. However, do not overfill
(to the top of the tank) to avoid overflowing
due to fluid expansion under normal
temperature.
4.
Remove mud, etc., stuck to the traveling
components.
3.1.17
PRECAUTIONS AFTER OPERATION
Check engine coolant level, engine oil pressure and fuel level for shortage through the use of
multi-display.
[
3. MACHINE OPERATION
]
3-44
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]