1.
Loosen 4 bolts for undercover under the engine,
remove under cover, and then open engine
hood.
2.
Prepare container for drain oil.
Container: 25 L (6.6 gal) or more
3.
Clean around oil filler cap (1), remove cap,
loosen drain valve (2) of engine oil pan (2),
and then drain engine oil.
4.
Tighten drain valve (2) securely.
5.
Remove oil filter (3) with filter wrench and
replace it with new one.
Filter wrench parts No. : 2421R171
The engine and muffler stay hot after stopping engine.
Allow enough time for the engine to cool before inspection or maintenance to avoid being burned.
In this machine, the engine oil filter is located at the separate position from engine. And the engine
oil filter is placed on the inside of door on the machine right rear side. When the filter is replaced,
do not fail to carry out idling operation for several minutes so as to reach the oil into engine.
Dispose of all hazardous waste in accordance with government environmental regulations.
[
4. MAINTENANCE
]
4-54
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]