1.
Make the width of the earth banking (raising the
ground level) enough to the machine width.
2.
Make the earth banking strong enough in order
no to turn over the machine during
loading/unloading due to broken side slope of
the earth banking.
If necessary, provide some supporting posts to
reinforce both side of the banking.
3.
The height of the platform or banking must
correspond to that of the base of truck/trailer.
4.
At loading the machine, climb up to the
truck/trailer from front end of the machine for
the case of the machine with attachment, and
from back end for the machine without
attachment.
5.
Set the machine at the prescribed position on
the truck/trailer.
A. 15 degrees or less
When loading the machine the front attachment
is removed, direct counterweight upward
direction on the slope.
5
B.
Use of Platform or Earth Banking
C.
Loading Machine without Front Attachment
[
5. TRANSPORTATION
]
5-7
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]